Operating voltage KNX | Bus voltage, ≤17.5 mA |
Operating voltage | 230 – 240 V AC 50 – 60 Hz |
Frequency | 50 – 60 Hz |
Stand-by consumption | <1 W |
Width | 8 modules |
Installation type | DIN rail |
Type of connection | Terminal screws | Bus connection: KNX bus terminal |
Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
Number of channels | 8 |
Lamp types | Incandescent, low-voltage and high-voltage halogen and dimmable energy saving lamps and LED |
Incandescent/halogen lamp load | 200 W |
LED lamp | Trailing edge (RC-mode): 200 W |
Energy saving lamps | Trailing edge (RC-mode): 200 W |
Switching capacity min. | 2 W |
Max. cable length | 100 m |
Ambient temperature | -5°C … 45°C |
Type of protection | IP 20 |
Protection class | II according to EN 60 669 |
Theben KNX 8 Channel Dimming Actuator (FIX2) (DM8-2T)
£519.13 + VAT
- 8-way universal dimmer actuator FIX2
- For dimming dimmable LED, incandescent lamps, LV, HV halogen lamps and energy saving lamps
- Also suitable for dimming of dimmable energy-saving lamps
- Also suitable for controlling fans
- LED switching status display for each channel
- Manual operation on device
- Dimming output: 200 W per channel
- Automatic load detection (can be deactivated)
- For R, L and C loads
Brand
Be the first to review “Theben KNX 8 Channel Dimming Actuator (FIX2) (DM8-2T)” Cancel reply
Related products
Dimming Actuators
£261.00 + VAT
Reviews
There are no reviews yet.