RAPIX DALI-2 DIN Blind and Shutter Relay - suitable for blind/curtain/shutter motors, AC and DC (New Product) (Available June 2023)

“RAPIX DALI-2 One Channel 1Amp Voltage Free Relay – AC/DC” has been added to your cart. View cart

RAPIX DALI-2 DIN Blind and Shutter Relay - suitable for blind/curtain/shutter motors, AC and DC (New Product) (Available June 2023) - Image 2

RAPIX DALI-2 DIN Blind and Shutter Relay - suitable for blind/curtain/shutter motors, AC and DC (New Product) (Available June 2023) - Image 3

RAPIX DALI-2 DIN Blind and Shutter Relay - suitable for blind/curtain/shutter motors, AC and DC (New Product) (Available June 2023) - Image 4

RAPIX DALI-2 DIN Blind and Shutter Relay - suitable for blind/curtain/shutter motors, AC and DC (New Product) (Available June 2023) - Image 5

RAPIX DALI-2 DIN Blind and Shutter Relay - suitable for blind/curtain/shutter motors, AC and DC (New Product) (Available June 2023) - Image 6

RAPIX DALI-2 DIN Blind and Shutter Relay – suitable for blind/curtain/shutter motors, AC and DC (New Product) (Available June 2023)

Key Features

Trailing Edge Phase dimming of lighting loads from received DALI commands
Suited to lighting loads up to 500 W (at 40 °C ambient) and 400 W (at 50°C ambient)
Suitable for most LED lighting loads
Also suitable for Incandescent, dimmable CFL and halogen lighting using electronic or magnetic transformers
Powered from the DALI line and consumes under 6 mA
Two wire dimming device: no Neutral required, only the ac Line (Active) and Load is connected
Nominal mains voltage 220 – 240 V ac, 47 – 53 Hz
Suitable for mounting in a ceiling void or on DIN rail using a DIN rail mounting bracket (Sold Separately)
Uses 1 DALI Short Address, and can be included in up to 16 DALI Group Addresses and/or up to 16 DALI Scenes
DALI Short Address, Group Addresses and DALI Scenes are configured using the RAPIX Addressing or RAPIX Integrator software
Can also be commissioned using other DALI commissioning software that supports DALI Device Type 4
Complies with DALI-2 standard IEC 62386 (Ed 2) and Device Type 4.
Compatible with both DALI and DALI-2 Systems.

£96.66 + VAT

SKU DGOZ-DINBSR-01 Category Rapix Tag Ozuno Rapix DALI2

Description
Brand

Description

This DIN mounted relay is suitable for the control of ac and dc motors commonly used for curtains, blinds, shutters and tilting shading systems.

This relay product can be used in any DALI system.

Operations include manual control – UP/OPEN, DOWN/CLOSE and STOP. Commissioning options allow proportional control, for example setting the amount open or tilt angle.

Hardware interlocks ensure that only one of the outputs UP/OPEN or DOWN/CLOSE can be active at any time.

Cable termination uses high quality rising cage clamp style screw terminals, and is suitable for terminating 1.5 mm² or 2.5 mm² cables (ac supply cables, switched load cables and DALI Line cables).

This product needs no external power supply – it is powered from the DALI line.

DALI-2 Certified