BEG PD2N Surface KNX Occupancy Detector with Logic
£274.40 + VAT
- Occupancy Detector
- 2 Logic Modules
- Light & HVAC Control
- Surface Mounting
- KNX occupancy detector with integrated KNX bus connector
- Low installation depth
- 1 x light output (for regulating or switching), 1 x slave output, 3 x HVAC outputs (separately programmable)
- Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
- Two logic modules
- Individual adaption of the PIR sensor sensitivity
- Mixed light measurement with internal and external light sensor
- Various locking functions
- Status LEDs can be activated / deactivated
- Programming button (phys. address) can be operated via remote control
- Regulation of up to three lighting groups using offset (external influence possible)
- Short presence, self-adjusting follow-up time, corridor function
- Recall of light scenes
- Temperature- and noise sensor
- Measurement of air quality based on volatile organic compounds (VOC)
- Up to 4 limit values possible
- Measurement of relative air humidity
- All values can be sent to the bus and used for HVAC applications
- Controller for temperature, air quality and humidity
- HVAC mode (0=automatic, 1=comfort, 2=stand-by, 3=economy, 4=antifreeze/heat protection)
- 5 button remote control, programmable at choice (accessory)
- Occupancy simulation
- Detection area can be extended thanks to master-slave-mode
- Extensive optimization options for light measurement
- Measured light value is communicated to the bus
- IR remote control-capable via IR remote control (optionally)
- PIN code
- Manual influence via external KNX push buttons possible
- Function control (heartbeat, cyclical sending)
- Forced switch-off
- Intelligent central-off function
- Premonition of switch-off
- Behaviour upon bus voltage return definable at choice
- Variable safety pause after switching off the lights
- Parameterisation from ETS 5 for integration into KNX systems
- The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
- Adaption of dimming curve
- Determination of the reflection factor, e.g. on a desk, with the optional BLE-IR-Adapter
- Burn-in function for fluorescent lamps selectable from 1h till 100h
- Soft-start
- Integrated Tunable White controller for human-centric lighting
- RGB control
- Spring-clamps
- Blinds
- Typical applications:
Offices, conference rooms, schools, nursery schools, hospitals
Brand
BEG Luxomat
BEG Luxomat are well known for their range of deluxe presence detectors but also have a suite of KNX actuators and system devices.
Related products
KNX Presence Sensors
£216.12 + VAT
KNX Presence Sensors
£15.00 + VAT
KNX Presence Sensors
£89.47 + VAT
KNX Presence Sensors
£164.12 + VAT
KNX Presence Sensors
£266.16 + VAT
KNX Presence Sensors
£87.00 + VAT
KNX Presence Sensors
£90.39 + VAT
KNX Presence Sensors
Send message