- Low profile KNX occupancy detector with integrated KNX bus connector
- KNX Secure ready
- HCL/RGB control
- Parameterisation from ETS 5 for integration into KNX systems
- Individual adaption of the PIR sensor sensitivity
- Mixed light measurement using internal and remote (optional) light sensors
- Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
- 1 x light output (for regulating or switching), 1 x slave output, 3 x HVAC outputs (separately programmable)
- Regulation of up to three lighting groups using offset (external influence possible)
- Short presence, self-adjusting follow-up time, corridor function
- Various locking functions
- Soft-start
- Two logic modules
- Recall of light scenes
- Deactivatable status indicators
- Temperature- and noise sensor
- The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
- Detection area can be extended thanks to master-slave-mode
- Extensive optimization options for light measurement
- Measured light value is communicated to the bus
- Adaption of dimming curve
- Bidirectionally remote control-capable with the IR adapter and the B.E.G. smartphone app
- PIN code
- IR remote control-capable via IR remote control (optionally)
- 5 button remote control, programmable at choice (accessory)
- Programming button (phys. address) can be operated via remote control
- HVAC mode (0=automatic, 1=comfort, 2=stand-by, 3=economy, 4=antifreeze/heat protection)
- Manual influence via external KNX push buttons possible
- Function control (heartbeat, cyclical sending)
- Occupancy simulation
- Forced switch-off
- Intelligent central-off function
- Premonition of switch-off
- Burn-in function for fluorescent lamps selectable from 1h till 100h
- Behaviour upon bus voltage return definable at choice
- Variable safety pause after switching off the lights
- Flush mounting with accessory 92833, surface mounting with accessories 92833 and 92121
BEG PD11-KNXs-FLAT-DX KNX Occupancy Detector with Noise & Temperature
£175.00 + VAT
- Low Profile KNX Detector
- Light & HVAC Channels
- Temperature & Noise Sensors
- HCL/RGB Control
- KNX Secure Ready
Brand
All products are subject to varying lead times depending on brand and quantity purchased.
Ex-stock products are typically dispatched next day on 2 day delivery nationally or 5-7 days internationally.
2-4 Weeks is the typical lead time for more non-stock products however occasionally some products may take up to 8 weeks, for example: bespoke finishes and engraving.
If you would like a firm lead time prior to order, please get in touch.
Related products
KNX Presence Sensors
£15.00 + VAT
KNX Presence Sensors
Zennio Presentia C vT. KNX presence detector with luminosity sensor for ceiling mounting
£135.00 + VAT
KNX Presence Sensors
£65.74 + VAT
KNX Presence Sensors
£65.74 + VAT