£456.06 + VAT
| Operating voltage KNX | Bus voltage, ≤4 mA |
| Operating voltage | 110 – 240 V AC 50 – 60 Hz |
| Frequency | 50 – 60 Hz |
| Stand-by consumption | ~2.4 W |
| Installation type | DIN rail |
| Width | 8 modules |
| Type of connection | Terminal screws | Bus connection: KNX bus terminal |
| Max. cable cross section | Solid wire: 0.5 mm² (Ø 0.8) to 4 mm² | Stranded wire with end sleeve: 0.5 mm² to 2.5 mm² |
| Number of channels | 8 |
| Type of contact | NO contact, 16 A, 10 A |
| Opening width | < 3 mm |
| Resistive load | 3680 W |
| Capacitive load | 200 µF |
| Incandescent/halogen lamp load | 2600 W |
| Fluorescent lamp load (conventional) parallel-corrected | 2000 W (200 µF) |
| Fluorescent lamp load (electronic ballast) | 1650 W |
| Energy saving lamps | 410 W |
| LED lamp < 2 W | 75 W |
| LED lamp 2-8 W | 850 W |
| LED lamp > 8 W | 850 W |
| Inrush current | max. 1500 A / 200 µs |
| Voltage output | 240 V AC |
| Switching output | Potential-free |
| Switching of various phases | Possible |
| Suitable for SELV | Yes if all channels switch at SELV |
| Accuracy current measurement | I > 1 A: ± 8 % of measured value; I < 1 A: ± 100 mA; lowest measurable value: 150 mA |
| C load | |
| Type | Module FIX2 |
| Ambient temperature | -5°C … 45°C |
| Type of protection | IP 20 |
| Protection class | II according to EN 60 669 |
