• Design-led Building Automation Solutions
Whatsapp Facebook Instagram Linkedin
RAPIX DALI Ethernet Interface (EDID) - 2 DALI Lines - (Does not include DC Switch Mode Power Supply)
RAPIX DALI Ethernet Interface (EDID) - 2 DALI Lines - (Does not include DC Switch Mode Power Supply) - Image 2
RAPIX DALI Ethernet Interface (EDID) - 2 DALI Lines - (Does not include DC Switch Mode Power Supply) - Image 3
RAPIX DALI Ethernet Interface (EDID) - 2 DALI Lines - (Does not include DC Switch Mode Power Supply) - Image 4
RAPIX DALI Ethernet Interface (EDID) - 2 DALI Lines - (Does not include DC Switch Mode Power Supply) - Image 5
RAPIX DALI Ethernet Interface (EDID) - 2 DALI Lines - (Does not include DC Switch Mode Power Supply) - Image 6
RAPIX DALI Ethernet Interface (EDID) - 2 DALI Lines - (Does not include DC Switch Mode Power Supply) - Image 7

RAPIX DALI Ethernet Interface (EDID) – 2 DALI Lines – (Does not include DC Switch Mode Power Supply)

Key Features

  • General purpose load switching (ON and OFF) using received DALI commands
  • Suitable for ac and dc loads up to 1 A, including all lighting load types and lower power motors such as exhaust and ceiling fans.
  • For ac loads, performs zero-crossing switching to minimise stresses in the load and reduce inrush currents.
  • Can be used with SELV and dc loads up to 24 V dc.
  • Suitable for low power / low current voltage-free interface functions wherever an isolated relay contact is required.
  • Includes over-temperature, overload and short circuit protection.
  • DIN rail mounting bracket is included.
  • Fits through common downlight holes.
  • Large terminals for easy connection.
  • Uses a single DALI Short Address; can be including in up to 16 DALI Group Addresses and/or up to 16 DALI Scenes.
  • DALI Short Address, Group Addresses and DALI Scenes are configured using RAPIX Addressing or RAPIX Integrator software.
  • Can also be commissioned using other DALI commissioning software that supports DALI Device Type 7.
  • Complies with DALI-2 standard IEC 62386 (Ed 2) and Device Type 7 (Switching Function).

£452.61 + VAT

SKU DGLMIFE02 Category Tag

Description

The RAPIX DALI-2 Ethernet Interface can be used as part of the RAPIX Lighting Control System which uses the Digital Addressable Lighting Interface (DALI-2) open standard protocol for lighting.

This product provides an isolated communication path between Ethernet and DALI. Control and monitoring of DALI-2 enabled luminaires and emergency lighting devices can be performed by an Ethernet-connected device.

The RAPIX DALI-2 Ethernet Interface can also be used to extend the number of DALI lines used by the RAPIX DALI-2 Zone Controller. A Zone Controller can operate with up to two Ethernet Interfaces, allowing a single Zone Controller to be expanded from 4 DALI lines to a maximum of 8 DALI lines.

When used in conjunction with the PC-based RAPIX Emergency software, DALI-1 and DALI-2 emergency lighting devices can be monitored on a schedule with automatic generation of test and maintenance reports.

This device is also suitable for Ethernet product developers who want an electrically safe interface to DALI with a rich protocol on the Ethernet side. A full protocol document and software development kit is available on request.

Attention Software Developers: A software development kit is available. Turbo charge your DALI development! Contact Us

 

The RAPIX DALI Ethernet Interface is proudly designed and manufactured in Australia.


DALI-2 Certified

Related Products

Documentation

Data Sheet


Installation Guide


Brochure


Brand

Ozuno

Ozuno is a 100% Australian owned premium lighting control systems company. They make rock solid lighting control and energy management products.
Products span the range from standalone lighting control devices to complex networked lighting control systems.

Related products