RAPIX DALI-2 One Channel 1Amp Voltage Free Relay - AC/DC

RAPIX DALI-2 One Channel 1Amp Voltage Free Relay - AC/DC - Image 3

RAPIX DALI-2 One Channel 1Amp Voltage Free Relay - AC/DC - Image 4

RAPIX DALI-2 One Channel 1Amp Voltage Free Relay - AC/DC - Image 5

RAPIX DALI-2 One Channel 1Amp Voltage Free Relay – AC/DC

Key Features

General purpose load switching (ON and OFF) using received DALI commands.
Capable of switching 16 AX @ 240 V ac.
Suitable for mains voltages 100 V – 240 V ac, 50/60 Hz.
High Inrush current: 500 A (2 ms).
Large Neutral and Earth termination bars.
Suitable for mounting in a ceiling void, or can be DIN rail mounted.
Optional DIN rail mounting bracket.
Zero crossing detection to maximise relay contact life.
Fits through a 90 mm downlight hole.
LED indicators (DALI and power).
Uses a single DALI Short Address; can be included in up to 16 DALI Group Addresses and/or up to 16 DALI Scenes.
DALI Short Address, Group Addresses and DALI Scenes are configured using RAPIX Addressing or RAPIX Integrator software.
Can also be commissioned using other DALI commissioning software that supports DALI Device Type 7.
Complies with DALI standard IEC 62386 Ed 2 and Device Type 7 (Switching Function).

£67.37 + VAT

SKU DGOZ-LPVFR-11 Category Rapix Tag Ozuno Rapix DALI2

Description
Brand

Description

This Low Power, Voltage Free Relay is a solid-state relay switching device for use on DALI or DALI-2 systems. This relay has certified compliance to DALI-2 Device Type 7 (Switching Function) and includes support for the optional up/down switching thresholds.

The relay switching terminals are voltage-free, supporting interfacing to external systems as well as switching ac and dc loads up to 1 A.

Large terminals allow easy termination of all 1.5 mm² or 2.5 mm² double insulated cables (for example, load cables and DALI cables) making this product suitable for a wide range of interface applications as well as common load switching in commercial and industrial buildings.

DALI-2 Certified