£46.42 + VAT
The RAPIX Universal Switch Input is a DALI-2 Push Button Input Device with six inputs. Each input is suitable for connection to switches or voltage-free (dry) contacts.
Each input can be configured for use with push-button momentary switches, toggle switches, or voltage free contacts typically found on motion / occupancy sensors. The input type can be configured using DALI commands.
This device is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.
When used in other DALI-2 systems, the internal application controller should be disabled.
This product can optionally act as a miniature DALI Application Controller, allowing sophisticated reaction to be configured for switch or voltage-free contact inputs. Multiple devices can easily be used on a single DALI line.
The internal Application Controller is commissioned using RAPIX Integrator or RAPIX Addressing software, and when this is used the input type is also automatically set depending on desired product operation, with over 20 possible functions that can be selected for each input. If a suitable function is not supported, Ozuno can create a custom function that is easily deployed using RAPIX Addressing or RAPIX Integrator software.
Control capability includes Short Addresses, DALI Groups, Broadcast, Scenes, RAPIX enhanced scenes, and more.
During operation, each input can be enabled or disabled based on a DALI Short Address, or by system rules managed by a RAPIX Zone Controller.
Like other RAPIX Application Controllers a Zone approach is used, where Zones can comprise a mix of DALI short addresses, groups, or the DALI broadcast.
The perfect companion: Ozuno momentary push button switch.
