BEG PD2N Recessed KNX Occupancy Detector with Logic

Description

• KNX occupancy detector with integrated KNX bus connector
• Low installation depth
• 1 x light output (for regulating or switching), 1 x slave output, 3 x HVAC outputs (separately programmable)
• Intelligent semi-automatic mode, occupancy-independent regulating mode (photoelectric switch), full automatic mode
• Two logic modules
• Individual adaption of the PIR sensor sensitivity
• Mixed light measurement with internal and external light sensor
• Various locking functions
• Status LEDs can be activated / deactivated
• Programming button (phys. address) can be operated via remote control
• Regulation of up to three lighting groups using offset (external influence possible)
• Short presence, self-adjusting follow-up time, corridor function
• Recall of light scenes
• Temperature- and noise sensor
• Measurement of air quality based on volatile organic compounds (VOC)
• Up to 4 limit values possible
• Measurement of relative air humidity
• All values can be sent to the bus and used for HVAC applications
• Controller for temperature, air quality and humidity
• HVAC mode (0=automatic, 1=comfort, 2=stand-by, 3=economy, 4=antifreeze/heat protection)
• 5 button remote control, programmable at choice (accessory)
• Occupancy simulation
• Detection area can be extended thanks to master-slave-mode
• Extensive optimization options for light measurement
• Measured light value is communicated to the bus
• IR remote control-capable via IR remote control (optionally)
• PIN code
• Manual influence via external KNX push buttons possible
• Function control (heartbeat, cyclical sending)
• Forced switch-off
• Intelligent central-off function
• Premonition of switch-off
• Behaviour upon bus voltage return definable at choice
• Variable safety pause after switching off the lights
• Parameterisation from ETS 5 for integration into KNX systems
• The product database for import into the ETS database can be downloaded from the B.E.G. homepage.
• Adaption of dimming curve
• Determination of the reflection factor, e.g. on a desk, with the optional BLE-IR-Adapter
• Burn-in function for fluorescent lamps selectable from 1h till 100h
• Soft-start
• Integrated Tunable White controller for human-centric lighting
• RGB control
• Spring-clamps
• Blinds
• Typical applications:
  Offices, conference rooms, schools, nursery schools, hospitals